60W010-C09 Datasheet, PDF (2/2 Pages) Rosenberger Hochfrequenztechnik GmbH & Co. KG – CABLE STRIPPER FOR PORTABLE ELECTRIC DRILL

TECHNICAL DATA SHEET
CABLE STRIPPER
FOR PORTABLE ELECTRIC DRILL
60W010-C09
Application feature
The Cable Preparation Tool automates the preparation of corrugated coaxial cables. All preparation
dimensions are controlled by the tools: no measuring required.
Connector Order No.:
53S115-C09N1, 53K115-C09N1, 53S215-C09N1
60S115-C09N1, 60K115-C09N1, 60S215-C09N1
Important Tool Tips and Instructions
1. Always wear safety glasses and PROTECTIVE GLOVES and don’t insert the finger into the tool.
2. To cut the cable use a hacksaw or use cable cutters in a rocking motion to maintain the
cylindrical shape of the cable.
3. Ensure that at least 20 cm (8”) of the cable is straight before using the tool.
4. The use of a cordless drill is recommended (3/8” 14.4V minimum / 1/2"18V recommended),
operate the drill in the 400-650 rpm range.
5. We recommended practicing this procedure on scrap cable to get the feel for the
process of the cable preparation and the dimensions.
6. Insert the tool on the cable and operate the drill in a fluid clockwise direction with slight forward
pressure.
7. As the inner conductor reaches the bottom of the tool, you will feel resistance and the cutting
will go slower. Keep the tool running a few extra turns to chamfer the inner conductor. This will
ensure a clean and uniform preparation.
8. Periodically mist the blades with WD-40 or similar lubricant and clean the tool body. This will
increase blades life significantly.
9. Follow additional instructions that are provided with each connector.
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel.: [phone]
Fax: [phone]
email: [e-mail]
Page
2/2