60S101-K066 Datasheet, PDF (2/3 Pages) Rosenberger Hochfrequenztechnik GmbH & Co. KG – Airline Plug / Jack

Technical Data Sheet
7-16 Airline Plug / Jack
60S101-K066
Electrical data
Insertion loss
≤ 0.06 dB at 8 GHz
Mechanical data
Mating cycles
Maximum torque
Recommended torque
Airline dimensions at 23 °C:
- Diameter outer conductor
- Diameter inner conductor
- Length outer conductor
- Length inner conductor
- Length difference
(outer conductor – inner conductor)
≥ 500
35 Nm
2.26 Nm
16.060 mm ± 0.010 mm
6.975 mm ± 0.005 mm
66.00 mm + 0.02 mm
65.98 mm - 0.02 mm
≤ 0.06 mm
Calculated data (non warranted)
Lossless characteristic impedance¹
Return loss²
50 Ω ± 0.10 Ω
≥ 45 dB, 0.2 GHz to 4 GHz
≥ 40 dB, 4 GHz to 8 GHz
1. The lossless characteristic impedance is calculated from the specified diameters of the inner and outer conductor.
2. The return loss is calculated from the characteristic impedance, the skin depth and the connector interface.
General standard definitions
For proper work the vector network analyzer (VNA) used needs a model describing the electrical behaviour
of this calibration standard. Depending on the VNA type different models, units and terms are used
and have to be entered into the VNA. All values are based on typical geometry and plating.
- Offset Z_o / Impedance / Z_o
- Offset Delay
- Length (electrical) / Offset Length
- Offset Loss
- Loss
50 Ω
220.257 ps
66.031 mm
0.70 GΩ/s
0.0134 dB/ GHz
Environmental data
Operating temperature range³
Storage temperature range
RoHS
+20 °C to +26 °C
0 °C to +50 °C
compliant
3. This range is a recommendation. However, the airline can be used in a wider range.
Any temperature change from 23 °C results in dimensional changes.
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : [phone]
Email : [e-mail]
Page
2/3