03S30R-MSOS3 Datasheet, PDF (2/3 Pages) Rosenberger Hochfrequenztechnik GmbH & Co. KG – RPC-3.50 Calibration Kit Plug

Technical Data Sheet
RPC-3.50
Calibration Kit
Plug
03S30R-MSOS3
Electrical data
Frequency range
Open
Error from nominal phase¹
Short
Error from nominal phase²
Load
Return loss
DC Resistance
Power handling
DC to 26.5 GHz
≤ 1.0°, DC to 4 GHz
≤ 2.0°, 4 GHz to 8 GHz
≤ 3.0°, 8 GHz to 26.5 GHz
≤ 1.0°, DC to 4 GHz
≤ 2.0°, 4 GHz to 8 GHz
≤ 3.0°, 8 GHz to 26.5 GHz
≥ 40.0 dB, DC to 4 GHz
≥ 35.0 dB, 4 GHz to 8 GHz
≥ 30.0 dB, 8 GHz to 26.5 GHz
50 Ω ± 0.5 Ω
≤ 0.5 W
1 _{The nominal phase is defined by the Offset Delay, the Offset Loss and the Fringing Capacitances}
2 _{The nominal phase is defined by the Offset Delay, the Offset Loss and the Short Inductance}
Mechanical data
Mating cycles
Maximum torque
Recommended torque
Gauge
≥ 500
1.70 Nm
0.90 Nm
0.00 mm to 0.08 mm
General standard definitions
For proper operation the vector network analyzer (VNA) needs a model describing the electrical behaviour
of this calibration standard. The different models, units, and terms used will depend on the VNA type and they
will have to be entered into the VNA. All values are based on typical geometry and plating.
Open
Offset Z_o / Impedance / Z_o
Offset Delay
Length (electrical) / Offset Length
Offset Loss
Loss
Fringing Capacitances
50 Ω
33.356 ps
10.00 mm
2.20 GΩ/s
0.0127 dB/ GHz
C₀ = -17.000 x 10^-15 F
/
C₁ = -2000.0 x 10^-27 F/Hz /
C₂ = 147.00 x 10^-36 F/Hz² /
C₃ = -3.0000 x 10^-45 F/Hz³ /
-17.000 fF
-2.0000 fF /GHz
0.1470 fF /GHz²
-0.0030 fF /GHz³
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : [phone]
Email : [e-mail]
Page
2/3