03S12L-000S3 Datasheet, PDF (2/3 Pages) Rosenberger Hochfrequenztechnik GmbH & Co. KG – Open Circuit Plug

Technical Data Sheet
RPC-3.50
Open Circuit
Plug
03S12L-000S3
Electrical data
Frequency range
Return loss
DC to 26.5 GHz
≤ 0.10 dB, DC to 4 GHz
≤ 0.12 dB, 4 GHz to 8 GHz
≤ 0.18 dB, 8 GHz to 26.5 GHz
Error from nominal phase¹
≤ 1.0°, DC to 4 GHz
≤ 1.5°, 4 GHz to 8 GHz
≤ 2.0°, 8 GHz to 26.5 GHz
1 _{The nominal phase is defined by the Offset Delay, the Offset Loss and the Fringing Capacitances.}
Mechanical data
Mating cycles
Maximum torque
Recommended torque
Gauge
≥ 500
1.70 Nm
0.90 Nm
0.00 mm to 0.04 mm
General standard definitions
For proper operation the vector network analyzer (VNA) needs a model describing the electrical behaviour
of this calibration standard. The different models, units, and terms used will depend on the VNA type and they
will have to be entered into the VNA. All values are based on typical geometry and plating.
Offset Z_o / Impedance / Z_o
Offset Delay
Length (electrical) / Offset Length
Offset Loss
Loss
Fringing Capacitances²
50 Ω
23.3495 ps
7.00 mm
2.20 GΩ/s
0.0089 dB/ GHz
2 _{Fringing Capacitances are determined individually for each open circuit and are documented in a Calibration Certificate.}
Environmental data
Operating temperature range³
Rated temperature range of use⁴
Storage temperature range
+ 20 °C to +26 °C
0 °C to +50 °C
- 40 °C to +85 °C
RoHS
compliant
3 _{Temperature range over which these specification are valid.}
4 _{This range is underneath and above the operating temperature range, within the open circuit is fully functional}
and could be used without damage.
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : [phone]
Email : [e-mail]
Page
2/3