03S128-K20N3 Datasheet, PDF (2/3 Pages) Rosenberger Hochfrequenztechnik GmbH & Co. KG – Calibration Adaptor

Technical Data Sheet
Calibration Adaptor
RPC-3.50 Plug – QMA Jack
Electrical data
Frequency
Return loss
03S128-K20N3
DC to 18 GHz
≥ 32 dB, DC to 4 GHz
≥ 24 dB, 4 GHz to 18 GHz
Mechanical data
Mating cycles
Maximum torque
Recommended torque
Engagement force
Disengagement force
Gauge
RPC-3.50
≥ 500
1.70 Nm
0.90 Nm
0.00 mm to 0.08 mm
QMA
≥ 100
25 N
20 N
0.00 mm to 0.08 mm
General standard definition
For proper operation the vector network analyzer (VNA) needs a model describing the electrical behaviour
of this calibration standard. The different models, units, and terms used will depend on the VNA type and they
will have to be entered into the VNA. All values are based on typical geometry and plating.
Offset Z_o / Impedance / Z_o
Offset Delay
Length (electrical) / Offset Length
Offset Loss
Loss
50 Ω
73.0479 ps
22.00 mm
2.51 GΩ/s
0.0159 dB/ GHz
Environmental data
Operating temperature range¹
Rated temperature range of use²
Storage temperature range
+ 20 °C to +26 °C
0 °C to +50 °C
- 40 °C to +85 °C
RoHS
compliant
1 _{Temperature range over which these specification are valid.}
2 _{This range is underneath and above the operating temperature range, within the calibration adaptor is fully functional}
and could be used without damage.
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : [phone]
Email : [e-mail]
Page
2/3