03S102-K100 Datasheet, PDF (2/3 Pages) Rosenberger Hochfrequenztechnik GmbH & Co. KG – Mismatch Airline Plug / Jack

Technical Data Sheet
RPC-3.50
Mismatch Airline
Plug / Jack
Material and plating
Connector parts
Center conductor
Outer conductor
Coupling nut
03S102-K100
Material
CuBe
Brass
Stainless steel
Plating
Gold, min. 1.27 µm, over chemical nickel
Gold, min. 1.27 µm, over chemical nickel
Passivated
Mechanical data
Mating cycles
Maximum torque
Recommended torque
Nominal Airline dimensions at 23 °C:
- Diameter outer conductor
- Diameter inner conductor 50 Ω section
- Diameter inner conductor 25 Ω section
- Length outer conductor
- Length inner conductor
- Length difference
(outer conductor – inner conductor)
- Length 25 Ω section
≥ 500
1.70 Nm
0.90 Nm
3.500 mm
1.520 mm
2.307 mm
100.00 mm
100.00 mm
≤ 0.04 mm
75.00 mm
Electrical verification standard
This Mismatch Airline is designed as an electrical verification standard. Reference measurement values
(calibration results) for transmission and reflection are included. Connected to a calibrated VNA the actual
measured transmission and reflection values can be compared to the reference measurement values and
the quality of the VNA calibration can be evaluated.
Environmental data
Operating temperature range¹
Storage temperature range
RoHS
+20 °C to +26 °C
0 °C to +50 °C
compliant
1. This range is a recommendation. However, the mismatch airline can be used in a wider range.
Any temperature change from 23 °C results in dimensional changes.
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : [phone]
Email : [e-mail]
Page
2/3