03AS122-K40S3 Datasheet, PDF (2/3 Pages) Rosenberger Hochfrequenztechnik GmbH & Co. KG – Attenuator Plug/Jack

Technical Data Sheet
RPC-3.50
Attenuator
Plug/Jack
Material and plating
Connector parts
Center conductor - plug
Center conductor - jack
Outer conductor
Coupling nut
Dielectric
Substrate
Electrical data
Frequency range
DC Resistance
Power handling
03AS122-K40S3
Material
CuBe
CuBe
Stainless steel
Stainless steel
PEEK
Al₂O₃
Plating
Gold, min. 1.27 µm, over nickel
Gold, min. 1.27 µm, over nickel
Passivated
Passivated
DC to 26.5 GHz
50 Ω
≤ 0.5 W
Electrical data (typical)
Return loss
Attenuation
≥ 32 dB, DC to 4 GHz
≥ 20 dB, 4 GHz to 26.5 GHz
40 dB ± 0.4 dB, DC to 4 GHz
40 dB ± 0.8 dB, 4 GHz to 26.5 GHz
Mechanical data
Mating cycles
Maximum torque
Recommended torque
Gauge
≥ 500
1.70 Nm
0.90 Nm
0.00 mm to 0.04 mm
Electrical verification standard
This Attenuator is designed as an electrical verification standard. Reference measurement values
(calibration results) for transmission and reflection are included. Connected to a calibrated VNA the actual
measured transmission and reflection values can be compared to the reference measurement values and
the quality of the VNA calibration can be evaluated.
Environmental data
Operating temperature range¹
Rated temperature range of use²
Storage temperature range
+ 20 °C to +26 °C
0 °C to +50 °C
- 40 °C to +85 °C
RoHS
compliant
1 _{Temperature range over which the reference measurement values are applicable.}
2 _{This range is underneath and above the operating temperature range, within the attenuator is fully functional}
and could be used without damage.
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : [phone]
Email : [e-mail]
Page
2/3