02S12S-000S3 Datasheet, PDF (2/3 Pages) Rosenberger Hochfrequenztechnik GmbH & Co. KG – Short Circuit

Technical Data Sheet
RPC-2.92
Short Circuit
Plug
02S12S-000S3
Electrical data
Frequency range
Return loss
DC to 40 GHz
≤ 0.10 dB, DC to 4 GHz
≤ 0.15 dB, 4 GHz to 18 GHz
≤ 0.20 dB, 18 GHz to 40 GHz
Error from nominal phase¹
≤ 1.0°, DC to 4 GHz
≤ 2.0°, 4 GHz to 18 GHz
≤ 3.0°, 18 GHz to 40 GHz
1 _{The nominal phase is defined by the Offset Delay, the Offset Loss and the Short Inductance.}
Mechanical data
Mating cycles
Maximum torque
Recommended torque
Gauge
≥ 500
1.70 Nm
0.90 Nm
0.00 mm to 0.03 mm
General standard definitions
For proper operation the vector network analyzer (VNA) needs a model describing the electrical behaviour
of this calibration standard. The different models, units, and terms used will depend on the VNA type and they
will have to be entered into the VNA. All values are based on typical geometry and plating.
Offset Z_o / Impedance / Z_o
Offset Delay
Length (electrical) / Offset Length
Offset Loss
Loss
Short Inductance²
50 Ω
28.3529 ps
8.50 mm
2.40 GΩ/s
0.0118 dB/ GHz
2 _{Short Inductances are determined individually for each Short circuit and are documented in a Calibration Certificate.}
Environmental data
Operating temperature range³
Rated temperature range of use⁴
Storage temperature range
+ 20 °C to +26 °C
0 °C to +50 °C
- 40 °C to +85 °C
RoHS
compliant
3 _{Temperature range over which these specification are valid.}
4 _{This range is underneath and above the operating temperature range, within the short circuit is fully functional}
and could be used without damage.
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : [phone]
Email : [e-mail]
Page
2/3