UVLED370-110E Datasheet, PDF (4/6 Pages) Roithner LaserTechnik GmbH – UV LED 5 mm

Reliability
1. Test items and result
Test Item
Standard Test
Methode
Test Conditions
Note
Number of
Damaged
Resostance to Soldering JEITA ED-4701 Tsld=260 ± 5°C, 10sec
Heat
300 302
3mm from the base of the lead
1 time
0/50
Solderability
JEITA ED-4701
303 303A
Tsld=245 ± 5°C, 5sec
using flux
Lead-free Solder (Sn-3.0Ag-0.5CU)
1 time
over 95%
0/50
Temperature Cycle
JEITA ED-4701 -40°C ~ 25°C ~ 100°C ~ 25°C
100 105
30min. 5min. 30min. 5min.
100 cycles 0/50
Moisture Resistance
Cyclic
JEITA ED-4701 25°C ~ 65°C ~ -10°C
200 203
90%RH 24hrs./1 cycle
10 cycles
0/50
Terminal Strength
(bending test)
JEITA ED-4701 Load 5N (0.5kgf)
400 401
0°C ~ 90°C ~ 0°C bend 2 times
No
noticeable
damage
0/50
Terminal Strength
(pull test)
JEITA ED-4701 Load 10N (1kgf)
400 401
10 ± 1 sec.
No
noticeable
0/50
damage
High Temperature
Storage
JEITA ED-4701
200 201
Ta=100°C
1000 hrs.
0/50
Temperature Humidity
Storage
JEITA ED-4701
100 103
Ta=60°C, RH=90%
1000 hrs.
0/50
Low Temperature
Storage
JEITA ED-4701
200 202
Ta=-40°C
1000 hrs.
0/50
Steady State Operating
Life
Steady State Operating
Life of High Humidity
Heat
Steady State Operating
Life of Low Temperature
I_F=25mA, Ta=25°C
I_F=15mA, 60°C, RH=90%
I_F=20mA, Ta=-30°C
500 hrs.
0/50
500 hrs.
0/50
1000 hrs.
0/50
2. Criteria for judging the damage
Item
Forward Voltage
Optical Power Ouput
* Note:
1. U.S.L: Upper Standard Level
2. L.S.L: Lower Standard Level
Symbol
V_F
P_O
Test Conditions
I_F=20mA
I_F=20mA
Criteria for Judgment
Min.
Max.
-
U.S.L x 1.1
L.S.L x 0.7
-
23.08.2011
UVLED370-110E
4 of 6