UVMAX250-15 Datasheet, PDF (1/4 Pages) Roithner LaserTechnik GmbH – Deep Ultraviolet Light Emission Source

rev.1.0 05.05.15
UVMAX250-15
• Deep Ultraviolet Light Emission Source
• 250 nm, 10-15 mW
• Multi chip LED array
• Thermistor
• TEC (optionally)
• TO3 metal can with SiO₂ glass lens
•
Forensic Analysis, Disinfection
Description
UVMAX250 is a series of AlGaN based deep UV multi chip LED arrays, utilizing 4 parallel strings (common cathode) carrying up to
9 pcs of parallel connected chip dies each. UVMAX250 features total optical output power of 10-15 mW at a nominal current draw
of 720mA, and typical emission wavelength of 255 nm. It comes in hermetically sealed TO3 metal can package with hemispherical
lens or flat glass window configuration, with integrated thermistor. UVMAX250 is widely used for forensic analysis, disinfection,
optical sensing, and imaging applications. UVMAX270 can optionally be equipped with an integrated thermo electric cooler.
Maximum Rating (TCASE = 25°C)
Parameter
Symbol
Values
Min.
Max.
Power Dissipation, DC*
PD
5.8
Forward Current (TA=25°C)
IF
720
Operating Temperature
TOPR
- 30
+ 55
Storage Temperature
TSTG
- 30
+ 100
Soldering Temperature (max 5s)
TSOL
+ 190
* Maximum dissipated power must not exceed 200mW without thermal management
Unit
W
mA
°C
°C
°C
Electro-Optical Characteristics (TCASE = 25°C, IF = 720 mA)
Parameter
Peak Wavelength^*1
Spectral Width (FWHM)
Forward Voltage^*2
Radiated Power^*3
Beam Angle (hemispherical lens)
Beam Angle (flat window)
*¹wavelength measurement tolerance: ± 2 nm
*²forward voltage measurement tolerance: ± 2 %
*³output power measurement tolerance: ± 10 %
Symbol
λP
∆λ
VF
PO
2Ó¨1/2
2Ó¨1/2
Values
Min. Typ.
250 255
12
6.5
10
35
120
Max.
260
15
8.0
15
Unit
nm
nm
V
mW
deg.
deg.
NOTE: UVMAX LEDs are accompanied by a test report, overriding the electrical characteristics given in this datasheet
www.roithner-laser.com
1