SLD302V Datasheet, PDF (1/7 Pages) Roithner LaserTechnik GmbH – 200mW High Power Laser Diode

200mW High Power Laser Diode
SLD302V
Description
The SLD302V is a gain-guided, high-power laser diodes fabricated by MOCVD.
MOCVD: Metal Organic Chemical Vapor Deposition
Features
• High power
Recommended power output
• Low operating current
Po = 180mW
Pin Configuration
Applications
• Solid state laser excitation
• Medical use
2
1
3
Structure
GaAlAs double-hetero-type laser diode
Bottom View
1. LD cathode
2. PD anode
3. COMMON
Operating Lifetime
MTTF 10,000H (effective value) at Po = 180mW, Tc = 25°C
Absolute Maximum Ratings (Tc = 25°C)
• Optical power output
Po
200
mW
• Reverse voltage
VR LD
2
V
PD
15
V
• Operating temperature Topr
–10 to +50
°C
• Storage temperature
Tstg
–40 to +85
°C
Warranty
This warranty period shall be 90 days after receipt of the product or 1,000 hours operation time whichever is
shorter.
Sony Quality Assurance Department shall analyze any product that fails during said warranty period, and if the
analysis results show that the product failed due to material or manufacturing defects on the part of Sony, the
product shall be replaced free of charge.
Laser diodes naturally have differing lifetimes which follow a Weibull distribution.
Special warranties are also available.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E88060C08-PS