RLTMPL-532 Datasheet, PDF (1/3 Pages) Roithner LaserTechnik GmbH – Green Diode Pumped Solid State Q-switched Laser

RLTMPL-532 30-150 mW
Q-SWITCHED PULSED LASER
Green Diode Pumped Solid State Q-switched Laser
All solid state 532 nm green q-switched laser featuring high peak power, high repetition rate and short pulse
duration, which is widely used in industry, such as marking on the diamond or stone, teaching of nonlinear
optics, experiments of generating 355nm or 266nm laser, fiber communication, etc.
Specifications
Wavelength
Operating Mode
Single pulse energy
Pulse Duration
Peak Power
Rep. rate
Controllable
Uncontrollable
Average Power
Ave. Power Stability (rms, over 4 hours)
Transverse Mode
Warm-up time
M² factor
Beam Divergence (full angle)
Beam Diameter (at the aperature)
Beam Height (from base plate)
Operating Temperature
Power Supply (90-260VAC)
Expected Lifetime
Warranty period
532 ±1 nm
Q-switched pulsed laser
5 – 30 µJ
~10 ns
300 – 1000 W
Specified one rep. rate, such as 1 k, 2 k, 3 k, up to 5 kHz, with
stable laser pulses emitting (stable pulse energy, peak,
duration and period)
Different rep. rate in the range of 1 Hz – 5 kHz can be
obtained by input an external TTL signal
Undefined rep. rate among 5k – 30 kHz and unstable laser
pulse emitting. Suitable for the applications only needing high
peak power pulses
Ave. power (mW) = Single pulse energy (μJ) * Rep. rate (kHz)
< 1%, < 3%, < 5%
Near TEM₀₀
< 10 min
< 1.5
< 2.0 mrad
~ 3.0 mm
29.0 mm
10 - 35 °C
PSU-FDA (included)
10000 hours
1 year
03.10.2011
RLTMPL-532 30-150 mW
1 of 3