ADL-80Y01TX Datasheet, PDF (1/2 Pages) Roithner LaserTechnik GmbH – Pumps for solid state lasers Miniature low power green laser Medical use

AlGaAs Invisible Laser Diode
2004/05 ver. 1.0
808nm 200mW 5.6 TO-Type
High Power Laser Diode
ADL-80Y01TX/TZ
• Features
1. Standard 5.6 TO-type: easy for design, assembly and integration
2. Low operation current
3. Long operation lifetime, MTTF>10000 hrs
4. Cost effective
• Applications
1. Pumps for solid state lasers
2. Miniature low power green laser
3. Medical use
• Absolute maximum ratings
Parameter
Symbol Condition Rating Unit
TX
Light output power
P_O
CW
200
mW
Reverse voltage (LD) V_RL
Case temperature
T_C
Storage temperature
T_S
-
2
V
-
-10~+50 ^oC
-
-40~+75 ^oC
• Electrical and optical characteristics (T_c=25 ^oC)
Parameter
Peak wavelength
Threshold current
Operating current
Operating voltage
Differential efficiency
Parallel divergence angle
Perpendicular divergence angle
Emission point accuracy
Symbol
I_th
I_op
V_op
xyz
Min.
805
-
-
-
0.8
-
-
-
Typ.
808
55
260
1.7
1
9
41
-
Max.
811
75
280
1.9
-
15
48
80
Unit
nm
mA
mA
V
mW/mA
degree
degree
um
Conditions
P_o=200mW
P_o=200mW
P_o=200mW
P_o=150-200mW
P_o=200mW
Precautions
1. Do not operate the device above the maximum rating condition, even momentarily. It may cause unexpected permanent damage to the device.
2. Semiconductor laser device is very sensitive to electrostatic discharge. High voltage spike current may change the characteristics of the device, or malfunction at any time during
its service period. Therefore, proper measures for preventing electrostatic discharge are strongly recommended.
3. Effective heat sink can help the device operates under a more relax condition; as a result, a more stable characteristics and better reliability can be achieved. So it is
recommended that always apply proper heat sink before the device is operating.
4. Do not look into the laser beam directly by bare eyes. The laser beam may cause severe damage to human eyes.