5W4HCA-H20 Datasheet, PDF (1/1 Pages) Roithner LaserTechnik GmbH – Super Bright White LED

5W4HCA-H20
Features
high intensity LED lamp
5 mm round epoxy package
UV resistant epoxy for outdoor use
Applications
indicators
illumination
Absolute Maximum Ratings ( Ta = 25 °C )
Super Bright White LED
Package Dimensions
5.40 [0.21]
¦Õ5.00 [0.2]
Parameter
Symbol
Max
Unit
Power Dissipation
PD
100
mW
Peak Forward Current *)
IFP
80
mA
Continuous Forward
IF
30
mA
Current
Reverse Voltage
VR
5
V
0.50 [0.02]
Operating Temperature
Range
Topr
-30 to +80 °C
2.54 [0.10]
Storage Temperature
Tstg Tstg -40 °C to +100 °C
Range
Lead Soldering
Tsol
260
°C
Temperature **)
*) Duty cycle max. 1/10, Pulse Width max. 0.1 ms
**) At the position of 4 mm from the bottom of the package within 5 seconds
0.60 [0.02]
0.50 [0.02]
CAT H O D E
Unit: mm[inches]
Tolerance: ¡À 0.25mm0.01]
Electrical Optical Characteristics ( Ta = 25 °C @ If = 20 mA )
Part No.
Material
Lens
Emitting
Color
Forward
Voltage (V)
Typ Max
Luminous
Intensity (mcd)
Min
Max
Chromaticity
Coordinate (x/y)
Viewing
Angle
(2θ1/2)
5W4HCA-H20 InGaN Water Clear White 3.2 3.6 19000 25000
0.32/0.30
20
Caution in ESD
1.Static electricity and surge damages the LEDs. It is recommended to use a wrist band or anti-electrostatic glove when
handling the LEDs. All devices and equipment and machinery must be properly grounded.
2.When inspecting own final products on which LEDs were mounted, It is easy to find static-damaged LEDs by light
emission test at lower current (below 1 mA is recommended) .
3.Damaged LEDs will show some unusual characteristics such as leak current remarkably increases, starting forward
voltage becomes lower, or the LEDs get unlighted at the low current.