BU52004GUL_10 Datasheet, PDF (9/12 Pages) Rohm – Omnipolar Detection Hall ICs (Polarity detection for both S and N features dual outputs)

BU52004GUL, BU52014HFV
●Position of the Hall Effect IC(Reference)
VCSP50L1
0.55
0.55
0.35
Technical Note
HVSOF5
0.6
0.8
0.2
(UNIT：mm)
●Footprint dimensions (Optimize footprint dimensions to the board design and soldering condition)
VCSP50L1
HVSOF5
Strings
e
b3
SD
SE
●Terminal Equivalent Circuit Diagram
OUT1, OUT2
VDD
Size(Typ)
0.50
0.25
0.25
0.25
(UNIT：mm)
Because they are configured for CMOS (inverter) output, the
output pins require no external resistance and allow direct
connection to the PC. This, in turn, enables reduction of the
current that would otherwise flow to the external resistor
during magnetic field detection, and supports overall low
current (micropower) operation.
Fig.28
GND
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
9/11
2010.01 - Rev.D