BDJXXX1HFV Datasheet, PDF (8/10 Pages) Rohm – Thermostat Output Temperature Sensor ICs with Power Down Function BDJ 1HFV Series

BDJ□□□1HFV Series
Technical Note
●Notes for use
1) Absolute Maximum Ratings
An excess in the absolute maximum ratings, such as supply voltage, temperature range of operating conditions, etc., can
break down devices, thus making impossible to identify breaking mode such as a short circuit or an open circuit. If any
special mode exceeding the absolute maximum ratings is assumed, consideration should be given to take physical safety
measures including the use of fuses, etc.
2) GND voltage
Make setting of the potential of the GND terminal so that it will be maintained at the minimum in any operating state.
3) Pin short and mistake fitting
When mounting the IC on the PCB, pay attention to the orientation of the IC. If there is a placement mistake, the IC may be
burned up.
4) Operation in strong electric field
Be noted that using ICs in the strong electric field can malfunction them.
5) Mutual impedance
Use short and wide wiring tracks for the power supply and ground to keep the mutual impedance
as small as possible. Use a capacitor to keep ripple to a minimum.
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
8/9
2009.08 - Rev.C