English
Language : 

BD3823FV_05 Datasheet, PDF (8/9 Pages) Rohm – NTSC-PAL Audio I/O Interface for Recording
ƔSelection of order type
BD 3 8 2 3 F V
Part No.
BD3823FV
E2
Tape and Reel information
SSOP-B20
<Dimension>
6.5 ± 0.2
20
11
1
10
0.15 ± 0.1
0.1
0.65 0.22 ± 0.1
<Tape and Reel information>
Tape
Embossed carrier tape
Quantity 2500pcs
Direction
of feed
E2
(Correct direction: 1pin of product should be at the upper left when you hold
reel on the left hand, and you pull out the tape on the right hand)
㧔Unit:mm)
Reel
1pin
Direction of feed
̪Orders are available in complete units only.
The contents described herein are correct as of October, 2005
The contents described herein are subject to change without notice. For updates of the latest information, please contact and confirm with ROHM CO.,LTD.
Any part of this application note must not be duplicated or copied without our permission.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding
upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams and information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any
warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such
infringement, or arising from or connected with or related to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, implied right or license to practice or commercially exploit any intellectual property rights or other
proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer.
The products described herein utilize silicon as the main material.
The products described herein are not designed to be X ray proof.
Published by
Application Engineering Group
Catalog No.05T397Be '05. 10 ROHM C 1000 TSU