BD433M2WFP3-C Datasheet, PDF (7/37 Pages) Rohm – 200-mA 3.3-V or 5.0-V Output LDO Regulators

BD4xxM2-C Series
Datasheet
●Absolute Maximum Ratings
Supply Voltage
Output Control Voltage
Parameter
Symbol
Ratings
Unit
*1
VCC
-0.3 to +45.0
V
*2
CTL
-0.3 to +45.0
V
Output Voltage
Power Dissipation
VOUT
-0.3 to +8.0
V
HTSOP-J8
*3
Pd
0.75
W
SOT223-4F
*3
Pd
0.60
W
Junction Temperature Range
Tj
-40 to +150
°C
Storage Temperature Range
Tstg
-55 to +150
°C
Maximum Junction Temperature
ESD withstand Voltage (HBM)
Tjmax
+150
°C
*4
V_ESD,HBM
±2000
V
*1 Do not exceed Pd.
*2 Applicable for product with Enable Input.
The start up orders of power supply (VCC) and the CTL pin do not influence if the voltage is within the operation power supply voltage range.
*3 HTSOP-J8 mounted on 114.3 mm x 76.2 mm x 1.6 mmt Glass-Epoxy PCB based on JEDEC. If Ta ≧25 °C, reduce by 6.0 mW/°C.
(1-layer PCB: Copper foil area on the reverse side of PCB:0 mm x 0 mm)
SOT223-4F mounted on 114.3 mm x 76.2 mm x 1.6 mmt Glass-Epoxy PCB based on JEDEC. If Ta ≧25 °C, reduce by 4.8 mW/°C.
(1-layer PCB: Copper foil area on the reverse side of PCB:0 mm x 0 mm)
*4 ESD susceptibility Human Body Model “HBM”
●Operating Conditions (-40 °C ≤ Tj ≤ +150 °C)
Parameter
Supply Voltage ( IOUT ≤ 200 mA )
Supply Voltage ( IOUT ≤ 100 mA )
Supply Voltage ( IOUT ≤ 200 mA )
Supply Voltage ( IOUT ≤ 100 mA )
Output Control Voltage
Start-Up Voltage
Output Current
Junction Temperature Range
Symbol
*1
VCC
*1
VCC
*2
VCC
*2
VCC
*3
CTL
*4
VCC
IOUT
Tj
*1 BD433M2WEFJ-C / BD433M2WFP3-C / BD433M2EFJ-C / BD433M2FP3-C
*2 BD450M2WEFJ-C / BD450M2WFP3-C / BD450M2EFJ-C / BD450M2FP3-C
*3 Applicable for product with Enable Input
*4 When IOUT = 0 mA
Min.
4.3
3.9
5.8
5.5
0
3.0
0
-40
Max.
Unit
42.0
V
42.0
V
42.0
V
42.0
V
42.0
V
－
V
200
mA
+150
°C
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
7/34
TSZ02201-0T2T0AN00040-1-2
29.Oct.2013 Rev.003