ESR Datasheet, PDF (6/8 Pages) Rohm – Anti-surge chip resistors

Datasheet
　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of
the characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this
document are presented only as guidance for Products use. Therefore, in case you use such information, you are
solely responsible for it and you must exercise your own independent verification and judgment in the use of such
information contained in this document. ROHM shall not be in any way responsible or liable for any damages,
expenses or losses incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take
proper caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will
not be applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment /
solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportation
1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time
period may be degraded. It is strongly recommended to confirm solderability before using Products of which
storage time is exceeding the recommended storage time period.
3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent
leads may occur due to excessive stress applied when dropping of a carton.
4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using
Products of which storage time is exceeding the recommended storage time period.
Precaution for Product Label
QR code printed on ROHM Products label is for ROHM’s internal use only.
Precaution for Disposition
When disposing Products please dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and
Foreigntrade act, please consult with ROHM in case of export.
Precaution Regarding Intellectual Property Rights
1. All information and data including but not limited to application example contained in this document is for
reference only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property
rights or any other rights of any third party regarding such information or data.
2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the
Products with other articles such as components, circuits, systems or external equipment (including software).
3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM
or any third parties with respect to the Products or the information contained in this document. Provided, however,
that ROHM will not assert its intellectual property rights or other rights against you or your customers to the extent
necessary to manufacture or sell products containing the Products, subject to the terms and conditions herein.
Other Precaution
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior
written consent of ROHM.
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in
the Products or this document for any military purposes, including but not limited to, the development of
mass-destruction weapons.
4. The proper names of companies or products described in this document are trademarks or registered trademarks
of ROHM, its affiliated companies or third parties.
　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　
Notice-PAA-E
© 2016 ROHMCo., Ltd.All rights reserved.
Rev.001