|
SMF13V Datasheet, PDF (5/10 Pages) Rohm – Transient Voltage Suppressor | |||
|
◁ |
SMF13V
ã ã ã ã ã ã ã ã ã ã ã ã ã ããããããããã Data sheet
âAppended figure
Procedure to obtain ESD Clampimg Voltage
IEC61000-4-2 Spec
IEC61000-4-2 Waveform
CS:150pFãRd:330Ω
simplified diagram in ESD machine
1. Set up ESD Tester at IEC61000-4-2 condition.
(IEC61000-4-2 ï¼C=150pF, R=330Ω)
2. Mount a sample on the high frequency test board
with the SMA connector.
3. Connect the SMA connector to the oscilloscope
by 50Ωcable.
Then, add the 10X-attenuator between test board
and the cable to protect the oscilloscope.
4. Discharge ESD in contact discharge mode at any voltage.
(normally 8kV Max.)
ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ã ãã ã ã ã ã ã ã ã ã ã ã
www.rohm.com
© 2017 ROHMCo., Ltd.All rights reserved.
5/6
ããã
2017/04/06_Rev.002
|
▷ |