SML-Z1_12 Datasheet, PDF (4/5 Pages) Rohm – High brightness 20/50mA guaranteed specifications PLCC2 package

SML-Z1 Series
Part No. Construction
∗ “−” will be taken out for emitting color
W/B/E series and pastel color.
Dice classification code
Rank sign (Chromaticity Rank)^∗
(for white LED and pastel color)
SML
Series name
Z14 Y4T
Package name Chip Type
Emitting Color Resin Color
T86
Taping Specifications
P
Rank sign (Brightness Rank)^∗
3 High Brightness Type
4 _{Ultra High Brightness Type}
8
V Red:630nm
U Red:620nm
D Orange:605nm
Y Yellow:590(589)nm
M Yellowish-Green:572(571)nm
F Green:565(564)nm
P Green:561(560)nm
E Bluish-Green:528nm
B Blue:470nm
WB White
CB Ice blue
GB Blue green
PB Pure green
SB Sapphire blue
T Transparent Colorless
W MilkyWhite
T86 Cathode at sprocket hole side
T87 Anode at sprochet hole side
1
For white LED and pastel color
cathode at sprocket hole side
∗ Concerning the rank sign.
• Please refer to the rank chart above for luminous intensity classification.
• Please refer to specification sheet for color classification.
• Part name is individual for each rank.
• When shipped as sample, the part name will be a representative part name.
General products are free of ranks. Please contact sales if rank appointment is needed.
Packing Specification
ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags.
Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request.
Please contact the nearest sales office or distributer if necessary.
www.rohm.com
4/4
© 2012 ROHM Co., Ltd. All rights reserved.
2012.11 - Rev.B