BU7291G-TR Datasheet, PDF (3/31 Pages) Rohm – CMOS Operational Amplifiers

BU7291G, BU7291SG, BU7294xx, BU7294Sxx
●Line-up
Topr
-40C to +85C
-40C to +105C
-40C to +85C
-40C to +105C
-40C to +85C
-40C to +105C
SSOP5
SSOP5
SOP14
SOP14
SSOP-B14
SSOP-B14
Package
Reel of 3000
Reel of 3000
Reel of 2500
Reel of 2500
Reel of 2500
Reel of 2500
Datasheet
Operable Part Number
BU7291G-TR
BU7291SG-TR
BU7294F-E2
BU7294SF-E2
BU7294FV-E2
BU7294SFV-E2
●Absolute Maximum Ratings(Ta=25C)
Parameter
Symbol
BU7291
BU7294
Ratings
BU7291S
BU7294S
Supply Voltage
Power dissipation
Differential Input Voltage^*5
Input Common-mode
Voltage Range
Input Current ^*6
VDD-VSS
SSOP5
Pd SOP14
SSOP-B14
Vid
Vicm
Ii
+7
0.54^*1*4
0.45^*2*4
0.70^*3*4
VDD - VSS
(VSS - 0.3) to VDD + 0.3
±10
Operating Supply Voltage
Vopr
+2.4 to +5.5
Operating Temperature
Topr
- 40 to +85
- 40 to +105
Storage Temperature
Tstg
- 55 to +125
Maximum
Junction Temperature
Tjmax
+125
Note: Absolute maximum rating item indicates the condition which must not be exceeded.
Application of voltage in excess of absolute maximum rating or use out absolute maximum rated
temperature environment may cause deterioration of characteristics.
*1 To use at temperature above Ta＝25C reduce 5.4mW.
*2 To use at temperature above Ta＝25C reduce 4.5mW.
*3 To use at temperature above Ta＝25C reduce 7.0mW.
*4 Mounted on a FR4 glass epoxy PCB(70mm×70mm×1.6mm).
*5 The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input pin voltage is set to more than VSS.
*6 An excessive input current will flow when input voltages of more than VDD+0.6V or lesser than VSS-0.6V are applied.
The input current can be set to less than the rated current by adding a limiting resistor.
Unit
V
W
V
V
mA
V
C
C
C
www.rohm.com
©2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥15ï½¥001
3/27
TSZ02201-0RAR1G200390-1-2
22.May.2013 Rev.001