BU7265G_13 Datasheet, PDF (3/37 Pages) Rohm – Ultra Low Power CMOS Operational Amplifiers

BU7265G BU7265SG BU7266xxx BU7266Sxxx
Datasheet
Absolute Maximum Ratings (T_A=25℃)
Parameter
Symbol
BU7265G
Rating
Unit
BU7266xxx BU7265SG BU7266Sxxx
Supply Voltage
Power Dissipation
Differential Input
Voltage^{(Note 6)}
Input Common-mode
Voltage Range
Input Current ^{(Note 7)}
VDD-VSS
SSOP5
SOP8
P_D
SSOP-B8
MSOP8
V_ID
V_ICM
I_I
+7
V
0.54 ^{(Note 1,5)}
-
0.54 ^{(Note 1,5)}
-
-
0.55 ^{(Note 2,5)}
-
-
0.50 ^{(Note 3,5)}
-
0.55 ^{(Note 2,5)}
0.50 ^{(Note 3,5)}
W
-
0.47 ^{(Note 4,5)}
-
0.47 ^{(Note 4,5)}
VDD - VSS
V
(VSS - 0.3) to VDD + 0.3
V
±10
mA
Operating Supply Voltage
V_opr
+1.8 to +5.5
V
Operating Temperature
T_opr
-40 to +85
-40 to +105
°C
Storage Temperature
T_stg
-55 to +125
°C
Maximum
Junction Temperature
T_Jmax
+125
°C
(Note 1)
(Note 2)
(Note 3)
(Note 4)
(Note 5)
To use at temperature above T_A=25C reduce 5.4mW/°C.
To use at temperature above T_A=25C reduce 5.5mW/°C.
To use at temperature above T_A=25C reduce 5.0mW/°C.
To use at temperature above T_A=25C reduce 4.7mW/°C.
Mounted on a FR4 glass epoxy PCB 70mm×70mm×1.6mm (Copper foil area less than 3%).
(Note 6) The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input pin voltage is set to more than VSS.
(Note 7) An excessive input current will flow when input voltages of more than VDD+0.6V or less than VSS-0.6V are applied.
The input current can be set to less than the rated current by adding a limiting resistor.
Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open
circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case
the IC is operated over the absolute maximum ratings.
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥15ï½¥001
3/33
TSZ02201-0RAR1G200270-1-2
12.Sep.2013 Rev.001