MNR35_08 Datasheet, PDF (2/4 Pages) Rohm – Compact 8-element Chip Resistor Networks

Resistors
MNR35
zCharacteristics
Item
Resistance
Variation of resistance
with temperature
Overload
Solderability
Resistance to
soldering heat
Rapid change of
temperature
Damp heat, steady state
Endurance at 70°C
Endurance
Resistance to solvent
Bend strength of
the end face plating
Guaranteed value
Resistor type
J : ±5%
Test conditions (JIS C 5201-1)
JIS C 5201-1 4.5
See Table.1
± (2.0%+0.1Ω)
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
± (1.0%+0.1Ω)
No remarkable abnormality on the appearance.
± (1.0%+0.1Ω)
± (3.0%+0.1Ω)
± (3.0%+0.1Ω)
± (3.0%+0.1Ω)
± (1.0%+0.1Ω)
± (1.0%+0.05Ω)
Without mechanical damage such as breaks.
JIS C 5201-1 4.8
Measurement : −55 / +25 / +125°C
JIS C 5201-1 4.13
Rated voltage (current) ×2.5, 2s.
Maximum Overload Voltage : 100V
JIS C 5201-1 4.17
Rosin·Ethanol (25%WT)
Soldering condition : 235±5°C
Duration of immersion : 2.0±0.5s.
JIS C 5201-1 4.18
Soldering condition : 260±5°C
Duration of immersion : 10±1s.
JIS C 5201-1 4.19
Test temp. : −55°C to +125°C 5cyc
JIS C 5201-1 4.24
40°C, 93%RH
Test time : 1,000h to 1,048h
JIS C 5201-1 4.25.1
Rated voltage (current), 70°C
1.5h : ON − 0.5h : OFF
Test time : 1,000h to 1,048h
JIS C 5201-1 4.25.3
125°C
Test time : 1,000h to 1,048h
JIS C 5201-1 4.29
23±5°C, Immersion cleaning, 5±0.5min.
Solvent : 2-propanol
JIS C 5201-1 4.33
zDimensions (Unit : mm)
∗1.27
6.4±0.4
B
A
A'
R103
0.5±0.2
1.0±0.2
B'
0.8±0.2
Cross section A-A'
6
211
11
5
Cross section B-B' ^{6 1}
0.55±0.1
5
2 34
Material
Resistive element
1 _{(Oxide metal thick film)}
2 Silver thick film electrode
3 Nickel electrode
4 Sn electrode
5 Alumina substrate
6 Overcoating (Glass)
∗ Pitch of the upper electrode.
Rev.D
2/3