MNR14_11 Datasheet, PDF (2/4 Pages) Rohm – Compact Chip Resistor Networks

MNR14 (06034 size)
Characteristics
Item
Resistance
Variation of resistance
with temperature
Overload
Guaranteed value
Resistor type
Jumper type
J : ±5%
F : ±1%
Max. 50mΩ
See Table.1
± (2.0%+0.1Ω)
Max. 50mΩ
Solderability
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
Resistance to
soldering heat
Rapid change of
temperature
Damp heat, steady state
± (1.0%+0.05Ω)
Max. 50mΩ
No remarkable abnormality on the appearance.
± (1.0%+0.05Ω)
Max. 50mΩ
± (3.0%+0.1Ω)
Max. 100mΩ
Endurance at 70°C
± (3.0%+0.1Ω)
Max. 100mΩ
Endurance
Resistance to solvent
Bend strength of
the end face plating
± (3.0%+0.1Ω)
Max. 100mΩ
± (1.0%+0.05Ω)
Max. 50mΩ
± (1.0%+0.05Ω)
Max. 50mΩ
Without mechanical damage such as breaks.
Data Sheet
Test conditions (JIS C 5201-1)
JIS C 5201-1 4.5
JIS C 5201-1 4.8
Measurement : −55 / +25 / +125°C
JIS C 5201-1 4.13
Rated voltage (current) ×2.5, 2s.
Maximum Overload Voltage : 100V
JIS C 5201-1 4.17
Rosin·Ethanol (25%WT)
Soldering condition : 235±5°C
Duration of immersion : 2.0±0.5s.
JIS C 5201-1 4.18
Soldering condition : 260±5°C
Duration of immersion : 10±1s.
JIS C 5201-1 4.19
Test temp. : −55°C to +125°C 5cyc
JIS C 5201-1 4.24
40°C, 93%RH
Test time : 1,000h to 1,048h
JIS C 5201-1 4.25.1
Rated voltage (current), 70°C
1.5h : ON − 0.5h : OFF
Test time : 1,000h to 1,048h
JIS C 5201-1 4.25.3
125°C
Test time : 1,000h to 1,048h
JIS C 5201-1 4.29
23±5°C, Immersion cleaning, 5±0.5min.
Solvent : 2-propanol
JIS C 5201-1 4.33
Dimensions (Unit : mm)
0.6±0.15 0.4±0.15
103
0.8
3.2±0.1
Cross section A-A'
61
5
Cross section B-B' ^{6 1}
5
234
Material
1
Resistive element
(Oxide metal thick film)
2 Silver thick film electrode
3 Nickel electrode
4 Sn electrode
5 Alumina substrate
6 Overcoating (Resin)
∗ Marking may change to the one-character type.
∗∗ Pitch of the upper electrode.
Equivalent circuit
R1
R2
R3
R4
R1=R2=R3=R4
www.rohm.com
2/3
○^c 2011 ROHM Co., Ltd. All rights reserved.
2011.12 - Rev.H