|
BD9412F_15 Datasheet, PDF (17/28 Pages) Rohm – PFC Direct current resonance type White LED Driver for Large LCD | |||
|
◁ |
BD9412F
Timing Chart
When it Detects Quick Detection Type Error
STB
2.0V
2.5V
SS
2.0V
FB
ADIM/4.4
IS
1.25V
VS
1
ADIM/8.8
2.5V
2.0V
ADIM/4.4
1.0V
2
COMPSD 4.0V
2.5V
2.0V
2.0V
CP
FAIL
1.25V
3
Figure. 24 Timing Chart 1
[The explanation of quick abnormal detection]
Due to the timing of â to ⢠in the above chart, the IC detects malfunction and starts the output-mute latch without CP
Charge . For â to â¢, the malfunction is detected according to the conditions in the table shown below.
No.
Content of Abnormal Detection
Condition of Abnormal Detection
â
Abnormal LED current detection
IS<(ADIM/8.8)V
â¡
Abnormal LED short detection
IS>1.0V
â¢
COMPSD Over Voltage detection
COMPSD⥠4.0V
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
TSZ22111 ⢠15 ⢠001
17/24
TSZ02201-0F5F0C100070-1-2
12.Aug.2015 Rev.002
|
▷ |