BU665XNUX Datasheet, PDF (16/18 Pages) Rohm – High-speed Load Response Full CMOS LDP Regulators

BU6650NUX, BU6651NUX, BU6652NUX, BU6653NUX
Technical Note
・About overcurrent protection circuit
Output has a built-in overcurrent protection circuit, which prevents IC break at load short. Note that this protection circuit
is effective for prevention of breaks due to unexpected accidents. Please avoid usage by which the protection circuit
operates continuously.
・About thermal shutdown
Output is OFF when the thermal circuit operates since a temperature protection circuit is built in to prevent thermal
breakdown. However, it recovers when the temperature returns to a certain temperature. The thermal circuit operates at
emergency such as overheating of IC. Since it is prepared to prevent IC breakdown, please do not use it in a state in
which protection works.
●About reverse current
For applications on which reverse current is assumed to flow into IC, it is recommended to prepare a path to let the current
out by putting a bypass diode between the VIN-VOUT terminals.
Reverse current
VIN
OUT
STBY _GND
Fig.96 Example of bypass diode connection
●About testing on a set board
When connecting a capacitor to a terminal with low impedance for testing on a set board, please be sure to discharge for
each process since IC may be stressed. As a countermeasure against static electricity, prepare grounding in the assembly
process and take sufficient care in transportation and storage. In addition, when connecting a capacitor to a jig in a testing
process, please do so after turning the power OFF and remove it after turning the power OFF.
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
16/17
2009.09 - Rev.B