|
BU9817FV Datasheet, PDF (13/15 Pages) Rohm – 4-channel temperature sensor IC for PCs with I2C BUS interface | |||
|
◁ |
Multimedia ICs
BU9817FV
Mode settings table 2 / 2
D0 : Shutdown
â0â - Operation mode.
â1â - The BU9817FV stops A / D operation and goes into low power shutdown mode.
D0 bit of each channel is common bit.
D1 : Comparator / Interrupt mode
â0â - Comparator mode.
â1â - Interrupt mode.
D2 : Open Drain Polarity
â0â - active low.
â1â - active high.
D3 : Reset
â0â - Operation mode.
â1â - Reset any bits except D3 bit of the configuration register, any registers, the A / D converter, and the
voltage hysteresis comparator.
D3 bit of each channel is common bit.
D4 : Interval Speed
Set the conversion cycle time of the 8bit A / D and the voltage hysteresis comparator when D5 bit (Interval
Mode) is â1â.
â0â - conversion cycle time is 4s.
â1â - conversion cycle time is 1s.
D4 bit of each channel is common bit.
D5 : Interval Mode
â0â - normal mode.
â1â - Interval mode.
D5 bit of each channel is common bit.
(4) Vul and Vdl Register (Read / Write)
Channel
D7
D6
D5
D4
D3
D2
D1
D0
1 ch
MSB bit6
bit5
bit4
bit3
bit2
bit1
LSB
2 ch
MSB bit6
bit5
bit4
bit3
bit2
bit1
LSB
3 ch
MSB bit6
bit5
bit4
bit3
bit2
bit1
LSB
4 ch
MSB bit6
bit5
bit4
bit3
bit2
bit1
LSB
D0 to D7: Voltage limit data of Vul and Vdl.
Default after power on reset and reset mode is Vul = 80h, Vdl = 66h.
|
▷ |