BU2098F_15 Datasheet, PDF (12/18 Pages) Rohm – Serial in/Parallel out Drivers

BU2098F
Operational Notes - continued
12. Regarding the Input Pin of the IC
In the construction of this IC, P-N junctions are inevitably formed creating parasitic diodes or transistors. The operation
of these parasitic elements can result in mutual interference among circuits, operational faults, or physical damage.
Therefore, conditions which cause these parasitic elements to operate, such as applying a voltage to an input pin lower
than the ground voltage should be avoided. Furthermore, do not apply a voltage to the input pins when no power
supply voltage is applied to the IC. Even if the power supply voltage is applied, make sure that the input pins have
voltages within the values specified in the electrical characteristics of this IC.
13. Ceramic Capacitor
When using a ceramic capacitor, determine the dielectric constant considering the change of capacitance with
temperature and the decrease in nominal capacitance due to DC bias and others.
Ordering Information
BU2 0 9 8 F
-
E2
Part Number
Package
F: SOP16
Packaging and forming specification
E2: Embossed tape and reel
Marking Diagrams
SOP16(TOP VIEW)
BU2098F
LOT Number
1PIN MARK
.www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
12/14
TSZ02201-0RHR1GZ00100-1-2
01.Sep.2015 Rev.002