BU9718KV Datasheet, PDF (10/10 Pages) Rohm – Picture cell driver for STN LCD driver for low voltage power supplies

Standard ICs
BU9718KV
Make sure of the following when resetting when the power is on.
• When using the external reset terminal, make RST = “L” at 1 ms or more with VDD at 2.7V or more.
• When not using the external reset terminal,VDD has to satisfy the following conditions.
VDD м 2.7V
Instruction receipt possible
tWAIT м 1ms
0 < tON < 10ms
VDD < 0.3V
•^{External dimensions (Units: mm)}
9.0 ± 0.3
7.0 ± 0.2
36 25
37
24
48
1
13
12
0.5 0.2 ± 0.1
0.125 ± 0.1
0.10
VQFP48
10