|
BD9122GUL-E2 Datasheet, PDF (10/19 Pages) Rohm – 2.5V to 5.5V, 0.3A 1ch Synchronous Buck Converter integrated FET | |||
|
◁ |
0J3J0AJ00110
Information on Advantages
Advantage 1ï¼Offers fast transient response with current mode control system.
BD9122GUL(transient response IO=50mAâ125mA)
ãVOUT=1.8Vã
VOUT
VOUT
Datasheet
ãVOUT=1.8Vã
IOUT
IOUT
VCC=3.3V
Ta=25â
VCC=3.3V
Ta=25â
Io=50â125mA
Fig.24 Comparison of transient response
Advantage 2ï¼ Offers high efficiency for all load range.
Io=125â50mA
ã»For lighter load:
Utilizes the current mode control mode called SLLM for lighter load, which reduces various dissipation such as switching
dissipation (PSW), gate charge/discharge dissipation, ESR dissipation of output capacitor (PESR) and on-resistance
dissipation (PRON) that may otherwise cause degradation in efficiency for lighter load.
Achieves efficiency improvement for lighter load.
ã»For heavier load:
Utilizes the synchronous rectifying mode and the low on-resistance
MOS FETs incorporated as power transistor.
ON resistance of P-channel MOS FET : 0.3Ω(Typ.)
ON resistance of N-channel MOS FET : 0.2Ω(Typ.)
100
SLLMTM
â¡
50 â PWM
â inprovement by SLLM system
â¡improvement by synchronous rectifier
0
0.001 0.01
0.1
1
Output current Io[A]
Achieves efficiency improvement for heavier load.
Offers high efficiency for all load range with the improvements mentioned above.
Fig.25 Efficiency
Advantage 3ï¼ã»Supplied in smaller package due to small-sized power MOS FET incorporated.
ã»Output capacitor Co required for current mode control: 10μF ceramic capacitor
ã»Inductance L required for the operating frequency of 1 MHz: 2.2μH inductor
Reduces a mounting area required.
VCC
RITH
CITH
DC/DC
Convertor
Controller
Cin
L
VOUT
Co
8mm
8mm
RITH
CVCC
CITH
CIN CO
L
Fig.26 Example application
www.rohm.com
© ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥15ï½¥001
10/17
TSZ02201-0J3J0AJ00110-1-2
02.MAR.2012 Rev.001
|
▷ |