RPR-220UC30N Datasheet, PDF (1/4 Pages) Rohm – Red light source high output reflective photosensor (photoreflector)

Sensors
RPR-220UC30N
Red light source high output reflective
photosensor (photoreflector)
RPR-220UC30N
The RPR-220UC30N employs a red light source which peak emitting wavelength is λp=630mm in the emitting side.
Therefore, it enables not only to judge whether it is an object with conventional function or not, but also to distinguish a
cyanogens color due to its complementary. Peak sensitivity wavelength which is λp=600nm also goes very well with the
receiving side.
zApplication
Printers, facsimile machines and various control
machineries
zFeatures
1) High output at IC 0.4mA (typ.) output
2) Detection distance is from 6mm to 12mm.
3) It is unnecessary to cut a lead which length is
2.95mm after mounting.
zExternal dimensions (Unit : mm)
6.4
2.8
2^{−φ2.2}
Note :
1. Unspecified tolerance shall be ±0.2.
2. Dimensions in parentheses are
shown for reference.
3. Dimensions in parentheses are
shown for reference.
0.35
(2.8)
1
4
2
3
4−0.6
4 − 0 . 5 +− 0 . 1
(2.5)
1 Anode
2 Cathode
4 Collector
3 Emitter
zAbsolute maximum ratings (Ta=25°C)
Parameter
Symbol
Limits
Unit
Input
(LED)
Forward current
Reverse voltage
Power dissipation
IF
50
mA
VR
5
V
PD
80
mW
Output
(Photo-
transistor)
Collector-emitter voltage
Emitter-collector voltage
Collector current
Collector power dissipation
Operating temperature
VCEO
VECO
IC
PC
Topr
30
V
4.5
V
30
mA
80
mW
−25 to +85
˚C
Storage temperature
Tstg
−30 to +85
˚C
Rev.A
1/3