RPM871-H14 Datasheet, PDF (1/8 Pages) Rohm – IrDA Infrared communication Module

Photo Link Module
RPM871-H14
IrDA Infrared communication Module
RPM871-H14
RPM871-H14 is an infrared communication module for IrDA Ver. 1.2 (Low Power). The infrared LED, PIN photo diode,
waveform shaping LSI are all integrated into a single package. This module is designed with power down function and
low current consumption at stand-by mode. The ultra small package makes it a perfect fit for mobile devices.
zFeatures
1) Applied to IrDA version 1.2. (Low Power)
2) Designed for low power consumption at stand-by for receiving (Typ.73µA).
3) Suitable for sets driven by battery due to power down control function.
4) Power supply voltage range : 2.6V to 3.6V
5) Constant LED load resistance can change communication range. (Approx. 20 to 60cm)
zApplications
Cellular phones, PDAs, etc.
zAbsolute maximum ratings (Ta = 25°C)
Parameter
Symbol
Limits
Unit
Power supply voltage
VCC
7.0
V
Input voltage
Vin
−0.3 to VCC+0.3
V
Power dissipation
Pd
150^∗1
mW
Operating temperature range Topr
−20 to +85
°C
Storage temperature range
Tstg
−30 to +100
°C
LED peak current
IFP
200^∗2
mA
∗1 70mm×70mm, t=1.6mm, glass epoxy mounting. Derating : 2mW/°C for operation above Ta=25°C
∗2 LED peak current<90µs. ON duty<20%
zRecommended operating conditions (Ta = 25°C)
Parameter
Symbol Min. Typ. Max. Unit
Power supply voltage
VCC
2.6
3.0
3.6
V
VLEDA
2.6
2.8
5.5
V
1/7