MNR04_1 Datasheet, PDF (1/5 Pages) Rohm – Chip resistor networks

Resistors
Chip resistor networks
MNR04 (1005 × 4 size)
MNR04
zFeatures
1) Extremely small and light
Area ratio is 60% smaller than that of chip 3216 (MNR14), while weight ratio has been cut 75%.
2) High-density mounting
Can be mounted even more densely than four 1005 chips (MCR01), and mounting costs are lower.
3) Can be mounted on a wide variety of devices
Squared corners make it excellent for mounting on image recognition devices.
4) Convex electrodes
Easy to check the fillet after soldering is finished.
5) ROHM resistors comply with the international standard ISO-9001.
Furthermore, changes to the design and specifications of products may occur without notice. Therefore, before
ordering or using this product, please make sure to reconfirm the specification sheet before ordering or using this
product.
zRatings
Item
Rated power
Conditions
Power must be derated according to the power derating curve in
Figure 1 when ambient temperature exceeds 70°C.
100
Specifications
0.063W (1 / 16W)
at 70°C
80
60
40
20
0
Ð 55
0
70 100 125
AMBIENT TEMPERATURE (°C)
Fig.1
Rated voltage
The voltage rating is calculated by the following equation. If the
value obtained exceeds the limiting element voltage, the voltage
rating is equal to maximum operating voltage.
E = P×R
Nominal resistance
See Table 1.
Operating temperature
E : Voltage rating (V)
P : Power rating (W)
R : Nominal resistance (Ω)
Limiting element voltage 25V
−55°C to +125°C
Rev.B
1/4