MCR01_11 Datasheet, PDF (1/4 Pages) Rohm – Compact Thick Film Chip Resistors

Compact Thick Film Chip Resistors
MCR01 (0402 size : 1 / 16W)
Features
1) Extremely small light
2) Highly reliable chip resistor
Ruthenium oxide dielectric offers superior resistance to the elements.
3) Electrodes not corroded by soldering
Thick film makes the electrodes very strong.
4) Flat surface further facilitates mounting
Mounting can also be automated.
ROHM resistors have approved ISO9001- / ISO/TS 16949- certification.
Ratings
Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product
before using or ordering it.
Item
Rated power
Conditions
Power must be derated according to the power derating curve in
Figure 1 when ambient temperature exceeds 70°C.
100
Specifications
0.063W (1 / 16W)
at 70°C
80
60
40
20
0 _−55
0
70 100 125 155
AMBIENT TEMPERATURE (°C)
Fig.1
Rated voltage
The voltage rating is calculated by the following equation.
If the value obtained exceeds the limiting element voltage,
the voltage rating is equal to the maximum operating voltage.
E= P×R
E: Rated voltage (V)
P: Rated power (W)
R: Nominal resistance (Ω)
Nominal resistance
See Table 1.
Operating temperature
Limiting element voltage 50V
−55°C to +155°C
Jumper type
Resistance
Max. 50mΩ
Rated current
1A
Operating temperature −55°C to +155°C
Table 1
Resistance tolerance
J (±5%)
F (±1%)
D (±0.5%)
Resistance range
(Ω)
Resistance temperature coefficient
(ppm / °C)
1.0 to 9.1 (E24)
+500 / −250
10 to 10M (E24)
±200
10 to 2.2M (E24, E96)
±100
10 to 91 (E24)
±100
100 to 1M (E24)
±50
www.rohm.com
1/3
○^c 2011 ROHM Co., Ltd. All rights reserved.
2011.06 - Rev.M