MCR006_11 Datasheet, PDF (1/4 Pages) Rohm – Compact Film Chip Resistors

Compact Film Chip Resistors
MCR006 (0201 size : 1 / 20W)
Features
1) Extremely small light
Area ratio is 60% smaller than that of chip 0402, while weight ratio has been cut 80%.
2) Highly reliable chip resistor
Ruthenium oxide dielectric offers superior resistance to the elements.
3) Electrodes not corroded by soldering
Thick film makes the electrodes very strong.
4) Flat surface further facilitates mounting
5) ROHM resistors have approved ISO9001- / ISO/TS 16949- certification.
Design and specifications are subject to change without notice. Carefully check the specification sheet supplied
with the product before using or ordering it.
Ratings
Item
Rated power
Conditions
Power must be derated according to the power derating curve in
Figure 1 when ambient temperature exceeds 70°C.
100
Specifications
0.05W (1 / 20W)
at 70°C
80
60
40
20
0 _−55
0
70 100 125
AMBIENT TEMPERATURE (°C)
Fig.1
Rated voltage
The voltage rating is calculated by the following equation.
If the value obtained exceeds the limiting element voltage,
the voltage rating is equal to the maximum operating voltage.
E= P×R
E: Rated voltage (V)
P: Rated power (W)
R: Nominal resistance (Ω)
Nominal resistance
See Table 1.
Operating temperature
Limiting element voltage 25V
−55°C to +125°C
Jumper type
Resistance
Max. 50mΩ
Rated current
0.5A
Operating temperature −55°C to +125°C
Table 1
Resistance tolerance
J (±5%)
F (±1%)
D (±0.5%)
Resistance range
(Ω)
1.0 to 9.1 (E24)
10 to 10M (E24)
10 to 10M (E24)
10 to 910 (E24)
1k to 1M (E24)
Resistance temperature coefficient
(ppm / °C)
+600/−200
±250
±250
±200
±100
www.rohm.com
1/3
○^c 2011 ROHM Co., Ltd. All rights reserved.
2011.06 - Rev.H