KD3004-DC10A_09 Datasheet, PDF (1/4 Pages) Rohm – Thick Film Thermal Printhead (300dpi)

Thick Film Thermal Printhead (300dpi)
KD3004-DC10A
KD3004-DC10A is developing type of GL40 series which are developed mainly for label printers.
We have adopted low coefficient of abrasion and conductive protection coat to GL40 series which are possible for high speed
and good printing quality.
That is KD3004-DC10A which is 24V standard thick film thermal print head with high speed, high quality of printing, high
durability, long life, and strong resistance to abrasion.
zApplications
High speed label printer
Food label printer
High speed ticket printer
High speed terminal printer
zFeatures
1) Perform 150km life time adopting new protective coat.
(Perform three times life time by coefficient of abrasion which is about is about 1/10 of current mass-producing coat.)
2) Build in thermal high speeded heater and perform high printing 4 IPS. (100mm / s)
3) Available for thermal transfer printing by adopting specific partial glaze.
zDimensions (Unit : mm)
(4.792)
118
108.416(Effetive Print Width)
DOT #1280
DOT #1
TYPE OF PRINTHEAD
3-M3(Effective Depth 3)
6.1±0.4
(5)
80±0.3
95±0.3
14.208±0.2
40±0.3
(19)
15±0.3
#2
#20
#1
#19
HIROSE HIF3FC-20PA-2.54DS
Max.5.5
Max.10
#6
#1
φ3H10 Length 4
(Effective Depth 3)
JST B6PS-VH
φ3H10
(Effective Depth 3)
www.rohm.com
1/3
○^c 2009 ROHM Co., Ltd. All rights reserved.
2009.10 - Rev.B