KD3002-DC10A Datasheet, PDF (1/5 Pages) Rohm – Thick Film Thermal Printhead(300dpi)

Printheads
KD3002-DC10A
Thick Film Thermal Printhead (300dpi)
KD3002-DC10A
KD3002-DC10A is developing type of GL40 series which are developed mainly for label printe rs.
We have adopted low coefficient of abrasion and conductive protection coat to GL40 series which are possible for high
speed and good printing quality.
That is KD3002-DC10A which is 24V standard thick film thermal print head with high speed, high quality of printing, high
durability, long life, and strong resistance to abration.
zApplications
High speed label printer
Food label printer
High speed ticket printer
High speed terminal printer
zFeatures
1) Perform 150km life time adopting new protective coat.
(Perform three times life time by coefficient of abrasion which is about is about 1/10 of current mass-producing coat.)
2) Build in thermal high speeded heater and perform high printing 4 IPS. (100mm / s)
3) Available for thermal transfer printing by adopting specific partial glaze..
zExternal dimensions (Unit : mm)
(5.396)
DOT #640
65
54.208(Effetive Print Width)
DOT #1
TYPE OF PRINTHEAD
6.1±0.4
(5)
φ3H10 Length 4
(Effective Depth 3)
3-M3(Effective Depth 3)
55.5±0.3
55±0.3
0.896±0.2
DOT #640
#2
#1
HIROSE HIF3FC-20PA-2.54DS
#20
#4 #1
Max.5.5
Max.10
#19
JST B4PS-VH
28±0.3
56±0.3
φ3H10
(Effective Depth 3)
1/4