KD2008-AF10A Datasheet, PDF (1/5 Pages) Rohm – Thick film thermal printhead (8dots / mm)

Printheads
Thick film thermal printhead
(8dots / mm)
KD2008-AF10A
KD2008-AF10A
The KD2008-AF10A is a A4-size thick-film thermal printhead, developed mainly for plain-paper fax machines and
portable printers. The makes conversion of printers from thermal transfers to direct thermal easier.
zApplications
Plain-paper facsimiles
Portable printers
Low speed ticket vendors
Measuring terminal printers
zFeatures
1) Providing easy design solution of power supply with the same bit number for each strobe at A4 size FAX application by
employing the first in the industry 216 bits Driver IC.
2) Achieved Logic voltage of 3.13 to 5.25V and provides the wide range of power supply voltage. Wide selection of
electrical components is able to choose.
3) Employment of ROHM’s own technology clip connector makes it possible to supply the goods without heat sink and
substrate it self. This allows wide range of designing since substrate could be directly attached to the mechanism.
zExternal dimensions (Unit : mm)
DOT #1728
230.5 +−0.3 (HEATSINK WIDTH)
230 (SUBSTRATE WIDTH)
216 (EFFECTIVE PRINT WIDTH)
DOT #1
LABEL
No.9
No.1
CONNECTOR B
Resin coating for protection of pin
Resin coating for protection of IC
No.9
No.1
CONNECTOR A
Max. 8.5
5.85 +− 0.3
4.85 +− 0.2
5 +− 0.2
11.5 +− 0.1
220.5 +− 0.2
CENTER OF HEAT ELEMENTS
11.5 +−0.1
4-M3
1/4