KD2002-CG10A Datasheet, PDF (1/5 Pages) Rohm – Compact medium speed thick film thermal printhead (8dots / mm)

Printheads
KD2002-CG10A
Compact medium speed thick film thermal
printhead (8dots / mm)
KD2002-CG10A
KD2002-CG10A is suitable for devices, such as high-speed POS and label printer applications, that require thermal
printheads capable of higher printing rates. Improved power circuit design means that with heavier current it is possible to
print at speeds as high as 150 mm/s. The GK Series is the thus ideal for label printers that need high printing rates.
zApplications
POS terminals, Label printers, CAT terminals, Multi-purpose small-sized printers
zFeatures
1) Using a special compact partial glaze and new heating element structure, achieves high-speed printing at 150 mm/s.
2) The use of the newly developed highly-durable conductive protective film has improved countermeasures against
static electricity.
3) The VH and GND sections of the power circuitry have been strengthened so that heavier current can be applied.
4) Ultra small connectors, designed to conform with FFCs, and miniature driver chips have been used. Although the
resulting printheads are surprisingly compact and lightweight, they can be used with large platens of up to 20 mm in
diameter.
5) One rank resistance value of 800Ω ± 3% eliminates the inconvenience of rank selection.
6) The required driving voltage of 3.15 to 5.25V allows wide range of power supply voltage setting. This also allows
multiple choice of electronic components for printers.
7) 2-inch, 3-inch and 4-inch series are available.
zExternal dimensions (Unit : mm)
65
54 (Effective Print Width)
Dot #432
Dot #1
Max.1.7
(5.1)
55±0.2
5±0.2
No.28
Connector
No.1
Exposed Conductor Side
2-M3 (Effective Depth 3)
1/4