KA2008-AF10A_07 Datasheet, PDF (1/5 Pages) Rohm – For Facsimiles 3.3V to 5V Printing Voltage(A Series)

Printheads
KA2008-AF10A
For Facsimiles 3.3V to 5V Printing Voltage
(A Series)
KA2008-AF10A
ROHM’s A Series printheads for A4 paper size Facsimile applications utilize original integrated mounting technology,
allowing for a wide range of logic voltages (3.13V to 5.25V).
zApplications
Facsimiles
Electric whiteboard
Measuring terminal printers
zFeatures
1) Providing easy design solution of power supply with the same bit number for each strobe at A4 size FAX application by
employing the first in the industry 216 bits Driver IC.
2) Achieved Logic voltage of 3.13 to 5.25V and provides the wide range of power supply voltage. Wide selection of
electrical components is able to choose.
3) Employment of ROHM’s own technology clip connector makes it possible to supply the goods without heat sink and
substrate it self. This allows wide range of designing since substrate could be directly attached to the mechanism.
zDimensions (Unit : mm)
Dot #1728
LABEL
No.9
No.1
CONNECTOR B
230.5±0.3 (HEATSINK WIDTH)
230 (SUBSTRATE WIDTH)
216 (EFFECTIVE PRINT WIDTH)
Dot #1
RESIN COATING FOR PROTECTION OF PIN.
RESIN COATING FOR PROTECTION OF IC.
No.9
No.1
CONNECTOR A
MAX 8.5
5.85±0.3
4.85±0.2
CENTER OF HEAT ELEMENTS
5±0.2
11.5±0.1
220.5±0.2
11.5±0.1
4-M3
Rev.A
1/4