ICP-S0.5 Datasheet, PDF (1/6 Pages) Rohm – Circuit protection elements

Overcurrent Protection Elements
Circuit protection elements
IC protector
zCircuit protection elements
Rohm’s circuit protectors have a very reliable current cut-off capability that protects ICs and their circuits from accidental
short circuit loads. Whether operated in AC or DC circuits, these circuit protectors have a very low internal resistance in
normal operation, but safely and rapidly break the circuit when the current cutoff level is exceeded.
zFeatures
1) Cutoff is sharp and repeatable.
2) Low internal resistance and minimal voltage drop.
3) Incombustible.
4) Compact.
5) Rated for continuous use.
6) Good temperature characteristics.
7) Withstands surges well.
8) UL certified (UL certification number E107856).
zApplication
Current surge protection
zOperation notes
Do not use this product on the primary side of commercial power supplies. Arcs that result after cutoff may damage the
molding.
Surface mounting Type
zICP-S series
Product
name
ICP-S0.5
ICP-S0.7
ICP-S1.0
ICP-S1.2
Rated
Cutoff Internal resistance Rated
Operating
Storage
current (A) characteristics
Typ.(Ω)
voltage (V) temperature (°C) temperature (°C)
0.5
Fig.1
0.150
0.7
Fig.2
1.0
Fig.3
0.084
0.061
50
−55 to +125
−55 to +125
1.2
Fig.4
0.048
Rev.A
1/5