IA2008-MB20A Datasheet, PDF (1/4 Pages) Rohm – MONOCHROME IMAGE SENSOR HEAD

Contact image sensor heads
IA2008-MB20A
Monochrome image sensor head
(8pixel / mm)
IA2008-MB20A
The IA2008-MB20A is a state-of-the-art compact, lightweight A4-size monochrome image sensor head that resulted from
the combination of ROHM’s LSI circuit technology and thermal printhead mounting technology.
zApplications
Facsimiles
Image scanning devices
zFeatures
1) The amplifiers, resistors, capacitors, and other discrete components that were normally externally attached, are built
into the sensor IC.
2) Compact body and lightweight achieved by the placement of the LED light source and sensor IC on the same board.
3) Uses a special ROHM developed prism that provides superior light gathering characteristics and uniform light
dispersion.
4) Uses a ceramic board as the base board for minimal temperature fluctuations and uniform thermal dispersion.
5) This is excellent in the point of γ (gamma) characteristics, and it realizes clear gradation. (Exceptionally clear print
quality is given by all bits conpensation in the both case of dark output and white output.)
zExternal dimensions (Units : mm)
232±0.5
216 (Effective Reading Width : 212)
10.5±0.5
No.1 Pixel
4-φ1.9
Effective
Depth7
(13.8)
(25)
(133)
A
(49.5)
5.5±0.5
(1.41)
No.7 _{(10.4) No.1}
Notes :
1. Curvature of glass surface : With the A-direction positive, 0 to 0.22 with
respect to the cover glass.
2. The frame material is UL94V-0.
(Connecter part number)
Socket Housing : IL-Z-7S-S125C3 (JAE)
Socket Contact : IL-Z-C3-A-15000 (JAE)
PIN No.
No.1
No.2
No.3
No.4
No.5
No.6
No.7
SIGNAL
Ao
GND
VDD
SI
CLK
GLED
VLED