BV1LB085FJ-C Datasheet, PDF (1/21 Pages) Rohm – 1ch Low Side Switch IC

Datasheet
Automotive IPD Series
1ch Low Side Switch IC
BV1LB085FJ-C
Features
■ Built-in overcurrent limiting circuit(OCP)
■ Built-in thermal shutdown circuit(TSD)
■ Built-in active clamp circuit
■ Direct control enabled from CMOS logic IC, etc.
■ Low On resistance RON=85mΩ(Typ)
(when VIN5V, ID=0.5A, Tj25C)
■ Monolithic power management IC with the control
block (CMOS) and power MOS FET mounted on a
single chip
■ AEC-Q100 Qualified ^{(Note 1)}
(Note 1) Grade1
General Description
The BV1LB085FJ-C is an automotive 1ch low side
switch IC, which has built-in overcurrent limiting circuit,
thermal shutdown circuit, and overvoltage (active clamp)
protection circuit.
Product Summary
On-state resistance (Tj =25°C, Typ)
Overcurrent limit (Tj =25°C, Typ)
Output clamp voltage (Min)
Active clamp energy (Tj =25°C)
85mΩ
17.5A
42V
260mJ
Package
SOP-J8
W(Typ) x D(Typ) x H(Max)
4.90mm x 6.00mm x 1.65mm
Applications
1ch low side switch for driving resistive, Inductive load, Capacitive load
Block Diagram
○Product structure: Silicon monolithic integrated circuit
www.rohm.co.jp
© 2016 ROHM Co., Ltd. All rights reserved.
TSZ22111・14・001
This product is not designed to protect it from radiation.
1/17
TSZ02201-0G3G0BD00090-1-2
17.Mar.2016 Rev.001