|
BU97941FV_15 Datasheet, PDF (1/27 Pages) Rohm – Multifunction LCD Segment Driver | |||
|
Datasheet
Multifunction LCD Segment Driver
BU97941FV MAX 104 segments (SEG26ÃCOM4)
âFeatures
ï® Integrated RAM for display data (DDRAM):
26 x 4 bit (Max 104 Segments)
ï® LCD drive output:
4 Common output, 26 Segment output
ï® Integrated 4ch LED driver circuit
ï® Support standby mode
ï® Integrated Power-on-Reset circuit (POR)
ï® Integrated Oscillator circuit
ï® No external component
ï® Low power consumption design
ï® Independent power supply for LCD driving
âApplications
ï® Telephone
ï® FAX
ï® Portable equipment (POS, ECR, PDA etc.)
ï® DSC
ï® DVC
ï® Car audio
ï® Home electrical appliance
ï® Meter equipment
etc.
âKey Specifications
â Supply Voltage Range:
+1.8V to +3.6V
â LCD drive power supply Range: +2.7V to +5.5V
â Operating Temperature Range: -40°C to +85°C
â Max Segments:
104 Segments
â Display Duty:
Static, 1/3, 1/4 selectable
â Bias:
Static, 1/3
â Interface:
3wire serial interface
âPackage
W (Typ.) x D (Typ.) x H (Max.)
SSOP-B40
13.60mm x 7.80mm x 2.00mm
âTypical Application Circuit
5.0V
3.3V
*About resistor value:
Determine the optimal value
based on the applied current
With 25mA as max per 1 port
VLCD
VDD
BU97941FV
LED1
LED2
LED3
LED4
BU97941FV
SEG0 to SEG25
VSS
CSB SD SCL
COM0 to COM3
VLED=5.0V
LCD
Signal input from controller
Figure 1. Typical application circuit
âProduct structureï¼Silicon monolithic integrated circuit
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
âThis product is not designed for protection against radioactive rays.
1/23
TSZ02201-0A0A2D300080-1-2
10.Apr.2015 Rev.004
|
▷ |