|
BU91530KVT-M Datasheet, PDF (1/60 Pages) Rohm – Multi-function LCD Segment Drivers | |||
|
Datasheet
LCD Segment Drivers
Multi-function LCD Segment Drivers
BU91530KVT-M
MAX 445 Segment(89SEGx5COM)
General Description
The BU91530KVT-M is 1/5, 1/4, 1/3 or 1/1 duty
general-purpose LCD driver that can be used for
frequency display in electronic tuners under the control of
a microcontroller. The BU91530KVT-M can drive up to
445 LCD Segments directly. The BU91530KVT-M can
also control up to 9 general-purpose output ports.
These products also incorporate a key scan circuit that
accepts input from up to 30 keys to reduce printed circuit
board wring.
Features
ï® AEC-Q100 Qualified (Note1)
ï® Key input function for up to 30 keys (A key scan is
performed only when a key is pressed.)
ï® Either 1/5, 1/4, 1/3 or 1/1 duty (static)
can be selected with the serial control data.
1/5 duty drive: Up to 445 segments can be driven
1/4 duty drive: Up to 360 segments can be driven
1/3 duty drive: Up to 270 segments can be driven
1/1 duty drive: Up to 90 segments can be driven
ï® Serial Data Control of frame frequency for common
and segment output waveforms.
ï® Serial data control of switching between the segment
output port , PWM output port and general-purpose
output port functions.(Max 9 ports)
ï® Built-in OSC circuit
ï® Integrated Power-on Reset Circuit
ï® No external component
ï® Low power consumption design
ï® Supports Line and Frame Inversion
(Note1) Grade 3
Key Specifications
â Supply Voltage Range:
+2.7V to +6.0V
â Operating Temperature Range: -40°C to +85°C
â Max Segments:
445 Segments
â Display Duty
1/1, 1/3, 1/4, 1/5 Selectable
â Bias:
1/2, 1/3 Selectable
â Interface:
3wire Serial Interface
Package
W (Typ.) x D (Typ.) x H (Max.)
TQFP100V
16.00mm x 16.00mm x 1.20mm
Applications
ï® Car Audio, Home Electrical Appliance,
Meter Equipment etc.
Typical Application Circuit
Key Matrix
+5V
(Note1)
From
Control
To Control
KS1/S79
|
KS6/S84
VDD
KI1/S85
|
COM1
KI5/S89 COM2
COM3
COM4
COM5/S78
S1/P1/G1
SCE
SCL
SDI
SDO
S9/P9/G9
S10
S77
OSC/S90
(P1/G1) (General purpose/PWM ports)
(P9/G9) (For use control of backlight)
LCD Panel
(Up to 445
Segments)
(Note1) Insert capacitors between VDD and VSS Câ¥0.1uF
Figure 1. Typical Application Circuit
âProduct structureï¼Silicon monolithic integrated circuit
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
TSZ22111ã»14ã»001
âThis product is not designed protection against radioactive rays.
1/56
TSZ02201-0P4P0D301190-1-2
19.Aug.2015 Rev.001
|
▷ |