BU24032GW Datasheet, PDF (1/23 Pages) Rohm – u - step System Lens Driver for Digital Still Cameras

Datasheet
System Lens Drivers
μ-step System Lens Driver
for Digital Still Cameras
BU24032GW
●General Description
BU24032GW is a system Lens Driver that uses μ-step
driving to make the configuration of the sophisticated,
high precision and low noise lens driver system possible.
This IC has a built-in driver for both DC motor and voice
coil motor and a μ-step controller that decreases CPU
power. Therefore, multifunctional lens can be applied.
●Features
„ Built-in 6 channels Driver block
1ch-5ch: Voltage control type H-bridge
(Adaptable to STM 1systems)
6ch: Current control type H-bridge
„ Built-in 2 channels PI driving circuit
„ Built-in 3 channels Waveforming circuit
„ Built-in FLL digital servo circuit
„ Built-in PLL circuit
●Key Specifications
„ Digital Power Supply Voltage:
„ Driver Power Supply Voltage:
„ Output Current (1ch-5ch):
„ Input Clock Frequency:
„ FET ON Resistance (1ch-5ch):
„ FET ON Resistance (6ch):
„ Operating Temperature Range:
2.7V to 3.6V
2.7V to 5.5V
±500mA(Max)
1MHz to 28MHz
2.0Ω(Typ)
1.0Ω(Typ)
-20℃ to +85℃
●Package
UCSP75M2
2.50mm x 2.50mm x 0.85mm
●Applications
„ Digital still cameras
●Typical Application Circuit
Example1
Photo interrupter
DVDD
DVSS
OUT3A
OUT3B
3ch
Driver
OUT4A
OUT4B/5B 4ch/5ch
Driver
OUT5A
RNF6
OUT6A
OUT6B
6ch
Driver
Logic
VDDAMP
MVCC12
MVCC345
MGND126
MGND345
OUT1A
1ch
Driver _OUT1B
M
2ch
Driver
OUT2A
OUT2B
Main Host
○Product structure：Silicon monolithic integrated circuit ○This product is not designed for protection against radioactive rays
.www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111・14・001
1/19
TSZ02201-0M2M0BC12060-1-2
18.Apr.2013 Rev.002