BRCF016GWZ-3 Datasheet, PDF (1/28 Pages) Rohm – Serial EEPROM Series Standard EEPROM

Datasheet
Serial EEPROM Series Standard EEPROM
WLCSP EEPROM
BRCF016GWZ-3
General Description
BRCF016GWZ-3 is a serial EEPROM of I²C BUS Interface Method
Features
 Completely conforming to the world standard I²C BUS.
All controls available by 2 ports of serial clock (SCL)
and serial data (SDA)
 1.7V to 5.5V Single Power Source Operation most
suitable for battery use
 1MHz action is possible(1.7V to 5.5V)
 Up to 16 bytes in page write mode
 Self-timed Programming Cycle
 Low Current Consumption
 Prevention of Write Mistake at Low Voltage
 More than 1 million write cycles
 More than 40 years data retention
 Noise Filter Built in SCL / SDA terminal
 Initial delivery state FFh
Package W (Typ) x D(Typ) x H(Max)
UCSP30L1 0.86mm x 0.84mm x 0.35mm
BRCF016GWZ-3
Capacity Bit Format
Type
Power Source Voltage Package
16Kbit
2K×8
BRCF016GWZ-3
1.7V to 5.5V
UCSP30L1
○Product structure：Silicon monolithic integrated circuit
www.rohm.com
©2015 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
○This product has no designed protection against radioactive rays
1/25
TSZ02201-0929AG100010-1-2
23.Sep.2015 Rev.001