BRCC064GWZ-3_13 Datasheet, PDF (1/29 Pages) Rohm – WLCSP EEPROM

Datasheet
Serial EEPROM Series Standard EEPROM
WLCSP EEPROM
BRCC064GWZ-3
General Description
BRCC064GWZ-3 is a serial EEPROM of I²C BUS Interface Method
Features
„ Completely conforming to the world standard I²C
BUS.
All controls available by 2 ports of serial clock
(SCL) and serial data (SDA)
„ Other devices than EEPROM can be connected to
the same port, saving microcontroller port
„ 1.6V to 5.5V Single Power Source Operation most
suitable for battery use
„ 1.6V to 5.5V wide limit of Operating Voltage, possible
FAST MODE 400KHz operation
„ Page Write Mode useful for initial value write at
factory shipment
„ Self-timed Programming Cycle
„ Low Current Consumption
„ Prevention of write mistake
¾ Write (write protect) Function added
¾ Prevention of write mistake at low voltage
„ More than 1 million write cycles
„ More than 40 years data retention
„ Noise filter built in SCL / SDA terminal
„ Initial delivery state FFh
Packages W(Typ) x D(Typ) x H(Max)
UCSP30L1 1.50mm x1.00mm x 0.35mm
BRCC064GWZ-3
Capacity Bit Format
Type
Power Source Voltage Package
64Kbit
8K×8
BRCC064GWZ-3
1.6V to 5.5V
UCSP30L1
○Product structure：Silicon monolithic integrated circuit
www.rohm.com
©2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
○This product has no designed protection against radioactive rays
1/25
TSZ02201-0R2R0G100590-1-2
27.May.2013 Rev.001