|
BRCB064GWZ-3 Datasheet, PDF (1/29 Pages) Rohm – WLCSP EEPROM | |||
|
Datasheet
Serial EEPROM Series Standard EEPROM
WLCSP EEPROM
BRCB064GWZ-3
General Description
BRCB064GWZ-3 is a serial EEPROM of I2C BUS Interface Method
Features
 Completely conforming to the world standard I2C
BUS.
All controls available by 2 ports of serial clock
(SCL) and serial data (SDA)
 Other devices than EEPROM can be connected to
the same port, saving microcontroller port
 1.6V to 5.5V Single Power Source Operation most
suitable for battery use
 1.6V to 5.5V wide limit of Operating Voltage, possible
FAST MODE 400KHz operation
 Page Write Mode useful for initial value write at
factory shipment
 Self-timed Programming Cycle
 Low Current Consumption
 Prevention of write mistake
¾ Write (write protect) Function added
¾ Prevention of write mistake at low voltage
 More than 1 million write cycles
 More than 40 years data retention
 Noise filter built in SCL / SDA terminal
 Pull-up resistor built in WP terminal
 Initial delivery state FFh
Packages W(Typ) x D(Typ) x H(Max)
UCSP30L1 1.50mm x1.00mm x 0.35mm
BRCB064GWZ-3
Capacity Bit Format
Type
Power Source Voltage Package
64Kbit
8KÃ8
BRCB064GWZ-3
1.6V to 5.5V
UCSP30L1
âProduct structureï¼Silicon monolithic integrated circuit
www.rohm.com
©2013 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥14ï½¥001
âThis product has no designed protection against radioactive rays
1/25
TSZ02201-0R2R0G100530-1-2
25.Feb.2013 Rev.003
|
▷ |